2004 - 2013 Mazda 3 passenger side mount
AWR Racing
$225.95
$250.00
(You save
$24.05
)
AWR Racing's 2004 - 2013 Mazda 3 passenger side mount is a must have for any Mazda 3 owner. Want less engine movement, cleaner shifts, wheel hop to disappear, as well as many more benefits? Look no further - AWR Racing has you covered! AWR offers the best valued mounts that suit driver needs. We have durometer options for daily, aggressive, and track driven builds. Our mounts have been street and track proven since 1995.
These mounts are designed to completely support the engine with durometer options to suit all styles of driving. All of our bushings can be replaced at any time. Mounts improve drive line response by inhibiting driveline lash, putting all that motion to the task of moving the car along.
Items included:
AWR Mazda 3 passenger side mount
Hardware/spacers
Specs:
- Made in the USA
- Laser cut and CNC folded
- Tig welded
- Aftermarket mount hardware
- Machined inner sleeves, nickel plated
- Energy Suspension polyurethane bushings (62, 70, 88, and 95 durometer applicable for the Mazda 3)
- Powder coated in Silver for a very durable finish.
What durometer is best for you?
At AWR Racing, we have been making high performance mounts since 1995. We have updated our motor mounts to a larger bushing size which helps reduce NVH, specifically reduce cabin vibration. Alongside a bigger bushing design, we have launched our tested and proven 62 durometer Energy Suspension polyurethane option which is perfect for daily and street use. Are you looking for stability without much NVH transferred to your vehicle? 62 durometer is the perfect solution for you.
62 - 70 durometer is recommended for daily driving with little to no mods. 70 - 88 durometer is recommended for lightly to intermediate modification levels. 88 - 95 durometer is recommended for highly modified street and track builds. You can always opt for a different durometer if your first choice doesn't suit you needs, all of our bushings can be swapped out or replaced!
- 62 durometer (ultra soft)
- 70 durometer (soft)
- 88 durometer (medium)
- 95 durometer (hard)
Initial NVH (noise, vibration, harshness) will start to settle after about 500 miles driven.
Application:
2004 - 2013 Mazda 3
S, I, MazdaSpeed
2.0, 2.3, 2.5
2006 - 2015 Mazda 5
Grand Touring, Sport, Touring
2.3, 2.5
Note* Does not fit 2012 - 2013 Mazda 3 with 2.0 Sky activ and 6 speed transmission.
AWR believes so strongly in their engine mounts and sway bars that they back them with a limited Lifetime Warranty. What's more, this warranty, excluding bushings, is retroactive to all mounts and sway bars built previously by AWR. Basically, if it breaks or fails, AWR will fix or replace it at their discretion. The warranty is 'limited' in that bushings are considered a normal wear item, so the urethane or rubber bushings are not covered, but if the metal cracks, breaks or otherwise fails, we'll replace or repair it.
Related Products
Reviews
-
Great "mod"
I bought a stock replacment 2000 miles ago and it popped and it felt like i had some front end issues i knew it was was the mount b.c the stock one from the factory lasted 80000 not sure why this one didnt. Needless to say dont waste your time or money on the replacment upgrade spend a little extra and get the 88 duro. everything tighned up.. im ordering the rear mount this week
-
great product
Got the AWR side and RMM for my 3. Side mount was totally shot. AWR mounts do cause some increased vibration, but the car has much better throttle response and wheel hop is not an issue anymore. Only had them installed a few miles now. I've heard the vibs settle down after a few hundred miles.