ENGINE MOUNT, REAR 2004-2012 MAZDA3

$99.95 $95.95
(You save $4.00)
(No reviews yet) Write a Review
SKU:
mz3mntRear
Weight:
7.00 LBS
Shipping:
Calculated at Checkout
ENGINE MOUNT, REAR 2004-2012 MAZDA3

Complete rear engine mount with stock rubber and metal bushing removed, and replaced with 70 or 88 durometer solid Energy Suspension urethane bushing,

For the 2004-2012 Mazda3 and the Mazdaspeed3 and 2012 Mazda3 and the Mazdaspeed3, 2.0, 2.3 and 2.5. Also fits 2006-2010 Mazda5.

Improves drive line response by inhibiting driveling lash, putting all that motion to the task of moving the car along. After removing the rubber from new stock mounts, we weld in strengthening pieces and then powder coat the metal black or silver. We then install the solid urethane bushings. The 70 durometer bushings, which are recommended for the street. The 88 durometer bushings, which are only recommended for racing. These may be too harsh for the street use. They may cause an undesirable resonance in the car at idle speeds but should not interfere with normal driving characteristics. For daily driving and normal street applications, order the mounts with the 70 durometer bushings.


AWR believes so strongly in their engine mounts and sway bars that they back them with a limited Lifetime Warranty. What's more, this warranty, excluding bushings, is retroactive to all mounts and sway bars built previously by AWR. Basically, if it breaks or fails, AWR will fix or replace it at their discretion. The warranty is 'limited' in that bushings are considered a normal wear item, so the urethane or rubber bushings are not covered, but if the metal cracks, breaks or otherwise fails, we'll replace or repair it.