Protege Transmission Mount

AWR Racing
usually ships in 48 hours
(You save $24.05 )
(1 review)
10.00 LBS
10.00 (in)
6.00 (in)
8.00 (in)
Current Stock:
Adding to cart… The item has been added

Complete mount on top of transmission for Mazda Protege with 70 or 88, or 95 durometer solid urethane bushings. Improves driveline response by inhibiting driveling lash, putting all that motion to the task of moving the car along. Completely new fabricated and reinforced mount, silver powder coated. The 70 durometer bushings, which are recommended for the street. The 88 durometer bushings are a bit firmer, and the 95 durometer which are only recommended for racing. These are too hard for the street and may cause undesirable resonance in the car. For street applications, order the mounts with the 70 durometer bushings.

AWR believes so strongly in their engine mounts and sway bars that they back them with a limited Lifetime Warranty. What's more, this warranty, excluding bushings, is retroactive to all mounts and sway bars built previously by AWR. Basically, if it breaks or fails, AWR will fix or replace it at their discretion. The warranty is 'limited' in that bushings are considered a normal wear item, so the urethane or rubber bushings are not covered, but if the metal cracks, breaks or otherwise fails, we'll replace or repair it.


  • 4
    Now that's a Trans mount

    Posted by Paul on 20th Jul 2012

    This replacement was spot on. Bolted right up and all specs fit right into place. The Rubber was tight though if you don't want a little vibration from a nut grabbing mount this may not be for you. But, if you want to know that this mount will not rip on the first sign of a good acceleration from a street vendor selling raw meat, transfer power crisply and holds that trans like a school kid texting on his iPhone, then you are good to go.